Low Price Guarantee
Find a Better Price? We'll Beat it!
Dirty Bird DB9 9mm Billet Lower Receiver (BLEM) - D067-1B Review
About Dirty Bird DB9 9mm Billet Lower Receiver (BLEM) - D067-1B
NOTE: These units have a cosmetic blemish which will not effect form or function. In fact, the blemish is not even visible from the exterior of the receiver so you may never even notice it. The DB9 Billet Lower Receiver is an ideal choice for starting your pistol caliber (9mm, 40 S&W, .357 Sig) AR build. Precision machined from a solid block of 7075-T6 billet aluminum and finished with hard-coat black anodizing per Mil 8625 Type 3 Class 2 specifications, you can be sure that this unit is as tough as they come. This lower receiver accepts any Glock style small frame pistol caliber magazines in 9mm, .40 S&W, .357 SIG, etc. and the mag well features a beveled feed lip for quick and easy mag swaps. Extensive testing and attention to detail also ensure that your Glock style magazines will drop free when released. The proprietary magazine catch and ejector is included and pre-installed from the factory. Other features include: Threaded takedown pin spring and detent hole for easy installation. Set screw is included. Note: To prevent excess pressure on the rear takedown pin and detent, you can shorten the detent spring by the same length of the set screw using some wire cutters prior to installation. Threaded upper tension screw to adjust any “slop” out of vertical fit between the upper and lower. Ambidextrous finger rests above and below the mag release. Threaded bolt catch pin included for easy bolt catch installation. Manufactured by New Frontier Armory right here in the USA. Lifetime Limited Warranty Important information: Magazine Compatibility This lower will drop-free factory Glock small frame pistol magazines. It has also been thoroughly tested with Magpul GL17 9mm pistol magazines to fit and drop-free. Promo, KCI, Kahn and other types of magazines will also work but due to varying thicknesses relative to factory Glock mag dimensions, slight modification to the magazine catch may be required. Last Round Bolt Hold-Open After evaluating many different design concepts from other manufacturers and finding fault in nearly all of them, we’ve designed this lower to use any standard mil-spec or similar bolt catch. Our last round bolt hold open technology instead resides in our matching pistol caliber upper receivers. These billet upper receivers use a PATENT PENDING design which has been proven in numerous field tests to provide the most reliable last round bolt hold open of any that we’ve tested. Bolt Carrier Group (BCG) Requirements You’ll need a BCG which is compatible with Glock style magazines. Some BCGs in the market are compatible with both Colt and Glock style magazines but some others are specific. The difference is Glock magazine compatible BCGs have the relief cuts necessary to clear the magazines. Lower Parts Kit Compatibility Any mil-spec or better LPK will work but you won’t need the mag catch assembly, bolt catch roll pin or the trigger guard as those are all included with this lower. Buffer Recommendations You’ll want to use a 9mm (extended) buffer which is longer and heavier than a standard carbine buffer. Standard carbine buffers will work but it’s a good idea to use a spacer to limit the rearward travel. This is simply because a 9mm BCG is shorter than a standard BCG which means there is more travel and gives the BCG more time to build speed as it returns home and this extra velocity can cause excess stress on the bolt catch. 9mm extended buffers are common and well worth the investment. Before firing your new build we suggest you adjust the ejector. You can do this quickly and easily by following these steps: Back-off the two hex-head screws holding the ejector just enough so the ejector has a semi-tight “friction fit”. Ensure the ejector is seated all the way to the rear and all the way down in it’s pocket. Close the upper onto the lower with the bolt all the way forward. SLOWLY cycle the bolt in and out about 1/4 of the way back a few times. Allow the bolt to close all the way and tighten up the ejector screws. No need to over-torque as this could cause the ejector to shift position, we’ll be adding blue (non-permanent) locktite in the next step. OPTIONAL: At this point you can use some dummy rounds to check for proper ejection. Remove one ejector screw at a time (ensuring the ejector does not move) and add a dab of blue locktite to the threads and tighten them back down.
Most Popular Lower Receivers
Bravo Company Manufacturing Complete Lower Receiver Assembly - M4
Expect nothing less than professional grade weaponry from BCM. The Bravo Company... read more
Aero Precision M4E1 Complete Lower Receiver w/ MOE SL Grip & SL Carbine Stock - Anodized
The M4E1 Complete Lower Receiver is the perfect base for your custom... read more
Foxtrot Mike Products Hybrid Polymer FM9 Complete AR9 Lower Receiver - FM9H-M
This Foxtrot Mike Products AR9 lower receiver features a hybrid polymer design... read more
Aero Precision M4E1 Complete Lower Receiver w/ MOE SL Grip & SL-S Carbine Stock - Anodized
The M4E1 Complete Lower Receiver is the perfect base for your custom... read more
Foxtrot Mike Products Complete FM9 Premium 9mm AR-15 Lower Receiver
Building a reliable 9mm AR when using Foxtrot Mike Products. The FM... read more
Dirty Bird DB9 9mm Billet Lower Receiver (BLEM) - D067-1B Questions and Answers
No Questions Yet.
Ratings and Reviews
Works great!
Lukas L.
5 years ago
This lower really takes the final details that a gunsmith is always wanting and really highlights them. I could not recommend a better lower for an AR-9
High quality dedicated pistol lower
Jonathan U.
5 years ago
Very impressed. Used for first pistol caliber build. Plan to purchase more for other builds too!
Nice product
Thomas M.
5 years ago
I am still building this. the fitment of parts is good. Overall nice lower
My DB9
Dennis K.
5 years ago
This DB 9 lower is going to be the perfect fit for my 9mm build. I have a few more parts to get, but I can't wait to take her out for the first time.
Amazing Lower
Dave R.
5 years ago
I bought the CA compliant DB9 blem lower. First, I'm still trying to find the blem. Second, the tolerances on this lower are second to none. I highly recommend these, especially for those who are in banned states like mine.
MSRP:
$139.95
$139.95
Used Price:
$97.97
$97.97
Sale Price:
$125.96
$125.96
Specifications |
|||
|---|---|---|---|
| Brand | Dirty Bird Industries | ||
| Category | Lower Receivers | ||
| Weight | 0.0000 oz | ||
Daily Deals
Popularity #521
$219.99
100%