ODIN Works 9 mm Atlas Compensator 1/2-28 threads - MB-ATLAS-9-28 Review

About ODIN Works 9 mm Atlas Compensator 1/2-28 threads - MB-ATLAS-9-28

The 3-piece modular design of the ODIN Works 9mm Atlas Compensator requires no shims or crush washer, making installation and proper timing fast and simple. The core and cap are made of 416R stainless steel for toughness and longevity. The Titanium sleeve is lightweight, strong, and has a tumbled grey look. It also has angled ports that control muzzle rise and reduce recoil. The Black Nitride finish provides protection and combined with the Titanium sleeve, gives the set a stunning 2-Tone appearance.  ODIN Works offers two thread patterns for the 9mm Atlas Compensators, 1/2×28 and 1/2×36. There is a 5.56, a 6.5 Grendel, and a 7.62 Atlas Compensator available as well. Reviews: Jeremy S. from The Truth About Guns said this about Atlas Compensators: “Machining and finish are awesome, and the look sets it apart. A 64% recoil reduction is surprising for a comp.” There were over 100 5-STAR rated reviews on the web at the time this was written. Plus, when you buy from AR15 Discounts, you get the AR15Discounts.com satisfaction guarantee. It means that if you’re not happy for any reason, you can send it back within 30 days for a full refund. When it comes to compensators, ODIN Works re-wrote the book. Get yours now! This variant is designed for 9mm projectiles and features 1/2×28 threads but other sizes can be found here: 5.56 Atlas Compensator 6.5 Grendel Atlas Compensator 9 mm Atlas Compensator 1/2-36 threads 7.62 Atlas Compensator NOTE: 416R is a Crucible brand steel that was specifically designed for building barrels. Most types of steel, including factory 416SS are not designed to be used in freezing environments. But this steel was designed to operate in arctic temperatures, down to -40F degrees. 416R steel also has greater accuracy potential than normal 416SS and 4150 steel due to its ability to take highly defined rifling and machining cuts. NOTE: Be SURE to check the threads on your AR Barrel when you are installing a new comp. It is very easy to cross thread and/or install the wrong compensator. Always double check and be very sure of what you are installing. Includes: Titanium sleeve w/ raw finish Black Nitride Isonited 416R stainless steel core Black Nitride Isonited 416R stainless steel cap Set screws for cap and hex wrench Technical Specs: For 9mm AR projects 1/2-28 or 1/2-36 thread patterns Weight: 3.9 ounces Diameter: 1″ inch  Length: 2.5″ inches overall

Most Popular Muzzle Devices

Daily Deals