Presma Skeletonized AR Pistol Brace Review

TWINS!!!!!!!!

Not being practical for field use. But for building FLASHY TWIN AR PISTOLS cannot go wrong. I don't care for the color as the builds will be stripped down and cerakoted with flashy colors. The fit up was ok had some troubles fitting over the pistol tubes but a quicking sanding to shrink the tube and inside of the braces to prepare for ceraokte proved to be a awesome look. The braces… read more are thin so don't go throwing them around but for range KINGS they are sweet looking. Even better is the quick shipping, low prices, and attention to detail for shipping them out.

---

Cancel Comment

What else you will need…

You will need to make sure you have a 1.250” buffer tube!!! This will not fit a normal sized buffer tube Also, this is not a complete unit, as you will be missing a piece that goes at the very back of this item, the shoulder pad attachment is NOT included, and I can’t find one separately anywhere

---

Cancel Comment

Difficult to install

Great item can’t say anything bad about its functionality

---

Cancel Comment

Better than plastic brace

Modern look better solid build ,better solution of pistol brace than flimsy plastic

---

Cancel Comment

Beautifully crafted

Fantastic! Smooth finish. The handgrip mounting hole and hardware fit perfectly in my 80% lower. If you’re a firearm builder, than this is the perfect aluminum handgrip for your next build.

---

Cancel Comment

Presma Skeletonized AR Pistol Brace - Gold

The color of gold was accurate I just had a hard time finding a buffer tube with OD to fit the brace.

---

Cancel Comment

Skeleton Brace for Fab Defense

This thing installs easy and looks great!

---

Cancel Comment

Product was great

Went on easy made well from what I can tell so far

---

Cancel Comment

Looks very nice

was a little tight for the buffer tube I ordered with it. however fitment is part of most firearms related installs. I am sure for 95% of people it won't be an issue. I wanted a specific buffer tube bc of its brand name. LOOKS GREAT

---

Cancel Comment

Nice Skeletonized Brace

You need a round buffer tube in order to use this, shockwave tube or standard mil spec or commercial tube isn’t compatible. It’s a nice addition to my skeletonized build on the war dog receiver set

---

Cancel Comment

Prisma Skeletonized Pistol Brace

Product came prompt. Solid metal product. Installation went as expected and tolerances where spot on. Once torqued down with a FAT wrench there is movement. Positioned just the bolt area of the brace right on the buffer tube gives me the perfect LOP.

---

Cancel Comment

Going to look awesome when it is all finished.

Great. They have all of the good parts for your build

---

Cancel Comment

Pleased overall

Pleased. Had to grease to get on tolerance was at its limits.

---

Cancel Comment

Presma Pistol Brace in Blue

Excellent quality workmanship. Attached to buffer tube with ease. Blue color catches the eye.

---

Cancel Comment

Great choice

Light weight build, so far really like this!

---

Cancel Comment

Cool looking pistol brace

I installed this on my 300 BO build that was almost all red and this really looks good.

---

Cancel Comment

Nice. But!

Nice fin but didn't fit my buffer tube.

---

Cancel Comment

Looks cool and it’s light!

I put one of these on my PDW build. I had to lube it with white lithium grease and heat it up with a torch to get it to fit over my buffer tube, but it began to move more freely once I got it further down the tube. It rubbed a bit of anodizing off the back of the tube but it’s barely noticeable. I hope it works with a strap just so I have that option. It looks like it will. Definitely… read more the coolest inexpensive pistol brace available.

---

Cancel Comment

Skeletonized AR Pistol Brace-Red

Very light, love the way it looks!!!!

---

Cancel Comment

Perfect brace

Love this brace. The tolerances are really tight. Sturdy, not flimsy like others I've used.

---

Cancel Comment

Pistol stock

I do not like it

---

Cancel Comment

AR15 Brace

The brace looks great on my skeletonized upper and lower. I did have a problem with fit on to the buffer tube. Very tight.

---

Cancel Comment

Good quality

Good looking pistol brace

---

Cancel Comment

Nice brace!

Nice parts, looks great. Snug fit on buffer, very comfortable. Will buy another for my next pistol build. Recommended it to my brother too.

---

Cancel Comment

Perfect Fit

Light, strong and simple, what's not to like

---

Cancel Comment

Didn't Fit

While I loved the skeletonized brace and was looking forward to having it on my AR Pistol... it didn't fit. Apparently my tube is not standard and was too fat for the brace. I wish someone had asked about the fit before I bought it. I assumed all tubes would be the same size on any AR15.

---

Cancel Comment

Lightweight brace

Solid, lightweight brace that looks good. Goes really well with the skeletonized handle. I've been to the range with it a couple times and I've had no issues.

---

Cancel Comment

Great brace, looks killer!

Use it with the Presma tube for the best fit!

---

Cancel Comment

Looks good

Have not had a chance to take it out to the range currently still in the building phase however it looks good.

---

Cancel Comment

Don't like the metal on metal...

Looks great! Don't like the screws to tighten. Don't like the metal on metal contact on my buffer tube. Needs some soft material between it. Hope it doesn't scratch.

---

Cancel Comment

Cant go wrong

Pretty solid quality, looks cool, for the price u honestly cant go wrong with this. Prolly wouldnt put it on a larger caliber than 5.56 tho, havent tryed myself yet so dont take my word for it.

---

Cancel Comment

Presma brace - Great price and fits perfectly.

Very happy with the overall assembled item. It matches my blue pistol tube and 1911 Pearce grips. The color is slightly different to my Sky Blue lower receiver, but no complaints here.

---

Cancel Comment

Cool stock for the price

Stock is pretty cool. A little tight fit but worked out well. I’ve had 50 different stocks on guns. This one is actually very comfortable. Might try this one in the adjustable version.

---

Cancel Comment

Thumbs up!

Perfect as expected.

---

Cancel Comment

AR pistol brace

First of all it looks awesome, I did the whole pistol in red and it came out interesting to say the least. ARDISCOUNTS service was excellent, no excuses for shipping. It came fast.

---

Cancel Comment

Quick service awesome product

My overall experience was excellent my order was processed fast and I quickly received my product I'm more than happy!! and I'm about to order another part.

---

Cancel Comment

No rear pad.

I am sending it back it doesn’t have a rear pad on it I ordered one from another company that does

---

Cancel Comment

Love this brace!

Has the look I wanted. Mounted solid. I put some blue loctite on bolts. It ain’t moving.

---

Cancel Comment

Love it !

Very nice quality fits great looks good

---

Cancel Comment

Gold pistol brace

Excellent product just right for my TOY. LOL.

---

Cancel Comment

Sweet love it

Fast ship even on a back order love to get another now I need a black one !

---

Cancel Comment

Very well built brace feels solid and looks great

I have used a lot of braces/blades and this is by far my favorite. It’s made very well and feels solid but still light . I bought the gold one and it goes well with my tin Gold parts. At first I couldn’t get it installed but I called cs and they ihelped me out and I got it on (better tight then loose..) also I have shopped around and the price here is by far the cheapest around.… read more

---

Cancel Comment

Red color little dark

good product, but the red is little dark compare with other red. but I am fin with it

---

Cancel Comment

Presma brace

Good little tight going on but looks and works fine

---

Cancel Comment

Ar brace

Pretty good overall

---

Cancel Comment

Awesome Brace. Very Tight Fit

I like the look of the brace which is what brought me to buy it however fitting it to a mil-spec buffer tube required all the KY jelly I had and my 12 ton hydraulic press. If I decide to try a different brace I'm definitely getting a different buffer tube because this skeletonized brace is tighter than tight.

---

Cancel Comment

Nice brace

Overall pleased with this brace. Fits great and looks great.

---

Cancel Comment

Tightened it to the extreme

Could use a better style of tightening

---

Cancel Comment

Do not buy

BAD !!! Does not fit buffer tube

---

Cancel Comment

Ok...

Has the look I was going for my overall build.

---

Cancel Comment

Brace

this brace looks and works great on my Ar pistol

---

Cancel Comment

It don't like 7.62x39

Probably shot about 200 rounds with it and not looking good. Probably would have done better if it was not back as far but that's where I wanted it. This was using the rear of the brace against my self.

---

Cancel Comment

Looks Great, But...

The skeletonized brace looks really great, but it's not very ergonomic. The protrusions where the QD is (which doesn't work well) really dig in to you if you shoulder it. Otherwise a great brace...

---

Cancel Comment

Ar15 pistol brace

the brace is extremely well built. The coating is way better than pictured. Assembly and installation was easy and the brace is solid

---

Cancel Comment

Very Cool

Yeah I really like this brace. It looks sick, very light weight, and really affordable. You can only adjust it by loosening and tightening the allen screws, so you can’t do that on the fly. However I love it and it’s great for range trips. Just make sure to really tighten the screws, so it doesn’t creep.

---

Cancel Comment

Worth the wait.

I've been watching this item for a while waiting for it to be back in stock. As soon as it was I snatched it up. It was worth waiting for. It looks great on the rifle and is light as heck! I put this on a competition PCC I'm building. Even though it's meant for a pistol it looks great on the rifle. Obviously, I'm going for a light as possible build for that rig. I will be getting… read more another for my AR pistol as it looks great on that too. Takes Cerakote well too with proper prep. A word of note: if you have the Kak pistol tube it may not fit. That tube is a few thousandths bigger than most. It may fit with force but will be very tight. I didn't force it on for fear of marring my tube. The brace has 2 threaded holes on the butt, possibly for attaching a pad of some sort, though I didn't see one from Presma. I did see some 3D printed ones searching on line. As it's going on a rifle a pad is legal, but DO NOT PUT A PAD ON IT IF YOU ARE USING IT ON A PISTOL!! The BATFE boys will take notice.

---

Cancel Comment

Presumably skeletonized brace

It’s a real nice and light pistol brace that goes perfectly with my ar9 build! Will be ordering a couple more for future builds. AR15Discounts has great prices and quick shipping

---

Cancel Comment

Just the look I was going for

You’re right if you worry this brace might move during recoil. Tighten it too much you might have reliability issues, not enough it might move on you. However, once you’ve got it just right it shouldn’t give you many problems. This is exactly the looki was going for tho and have been very happy with this brace.

---

Cancel Comment

Very nice!

Nicely made. Fits perfectly and adds a little flair, showing off my tungsten cerakoted buffer tube.

---

Cancel Comment

Very cool!

This is a nice brace.

---

Cancel Comment

Presma brace, good value, color off

First off, this is made in China. The feel and overall fit is pretty nice. One complaint is the blue anodizing is slightly different shades on the two parts. Cool, light, affordable! I would Buy this again.

---

Cancel Comment

Skeletonized Stock

Great so far!

---

Cancel Comment

Great fit

Looks great. Makes my gun stand out.

---

Cancel Comment

Love this stock

It's one of the best stocks I've tried will be buying more once in stock again

---

Cancel Comment

Blade brace

very well crafted. Perfect fit. Will purchase another.

---

Cancel Comment

Great look!

Fin has a great look and is semi functional. Would not recommend if you are looking to replace a stock but for pistol applications perfect!.

---

Cancel Comment

Awesome part!

overall its an awesome part. would buy another one for future builds. I had mine powder coated from a buddy.

---

Cancel Comment

Perfect!

I ordered this for my AR Pistol I'm really digging it! Great price fast shipping!

---

Cancel Comment

Mad

I haven't receive my pistol brace yet so I'm wondering what is taking so long it has been over two weeks or more .

---

Cancel Comment

Awesome pistol brace

great service, great people A+++++

---

Cancel Comment

Presma skeletonized pistol brace - black

The quality is excellent on this brace. I have not gotten to the range yet, but I am expecting it to hold up. I will definitely buy again for future builds. The shipping was fast. Overall I am happy with my purchase.

---

Cancel Comment

Nice little brace

I always wanted a nice, sturdy, skeletonized brace and this Presma brace fit my needs and was fairly inexpensive. I love the look and feel of it, as well as the solid construction. Would definitely recommend if you're looking to buy a skeletonized brace for your next firearm.

---

Cancel Comment

Looks great with the skeletonized pistol buffer tube

It fits perfect and stays solid on the tube absolutely zero movement. Ultra light and bad ass looking, for the price I'd highly recommend this product. The colors are beautiful as well

---

Cancel Comment

Good part

Very happy with my brace

---

Cancel Comment

Exactly what I wanted

I really loved the look of the skeleton butt stock but I didn’t realize it wasn’t milspec so I had to return it

---

Cancel Comment

It's nice but...

It has a very nice finish and looks pretty decent, but it is an extremely tight fit on my buffer tube. I'm not even sure if I'll be able to get it off without damaging my buffer tube or brace. This is the exact buffer set up I used https://palmettostatearmory.com/psa-custom-pcc-short-pistol-buffer-tube-kit-kak-compatible-5165449487.html

---

Cancel Comment

Looks awesome fits perfect

Looks awesome fits perfect highly recommended

---

Cancel Comment

Presma Custom AR15 light Aluminum Brace

the Presma Skeletonized AR pistol brace are the most superior Quality to added to AR15 for a lifetime collections and superior looks.

---

Cancel Comment

Excellent

Had to return because it didn't fit my tube but very nice brace!

---

Cancel Comment

Great quality and durable

Easy install and great quality. Very happy with it

---

Cancel Comment

Nice, light weight product

Great product lightweight

---

Cancel Comment

Nice and light

The brace is machined very well. Very lightweight. High quality for the price. Fits right on mil spec tube. Same basic footprint as the shockwave, but looks way cooler. Very positive experience with this brace and ar15discounts.com. This was my first purchase here, but won’t be my last. Thanks!

---

Cancel Comment

Cool Brace

The brace is strong, and it looks sharp with the rest of my skeletonized build.

---

Cancel Comment

Presma pistol brace

Loved it super light like I wanted

---

Cancel Comment

The best

Ordered on Friday night, got on Tuesday during the covid 19. Highly recommended. They are the best. From Cali to Texas by Tue.

---

Cancel Comment

Skeleton Pistol Brace

Fantastic product. A little tight fitting due to anodizing on brace and buffer tube. Froze the tube, heated the brace to 350 in oven , dropped on and its set. I love the function and look.

---

Cancel Comment

Cannot be beat at that price point!

So far, so great. Extremely impressed with the quality and ease of install. Perfect for my .300 blackout pistol!

---

Cancel Comment

Sweet!

Beautiful, sturdy brace. Surprisingly light.

---

Cancel Comment

Good price and good quality

Its a lot better built than I expected for $40

---

Cancel Comment

Presma Skelotonized Pistol Brace

I was kind of skeptical at 1st because I am not a fan of the shockwave which this reminded me of but it's nothing like it. Looks amazing and the price cant be beat.

---

Cancel Comment

Perfect look

Finished off my 9mm Pistol build very nicely. Went very well with the Strike Industries carbine pistol brace in red. Would buy again when I need another pistol brace.

---

Cancel Comment

Nice product

It seems nice. Fits the tube really snugly

---

Cancel Comment

Presma Skeletonized AR Pistol Brace

Well made, light weight, perfect fit. Not just a good value, a good product.

---

Cancel Comment

Solid Brace

I bought this brace because it was inexpensive and skeletonized like the rest of my pistol and I just put a few hundred rounds through it yesterday with zero issues. Just make sure you torque it down, I had mine torqued to 35 lb. Would highly recommend

---

Cancel Comment

Presma AR-15 Brace

As described. Good quality. Tight fit had to hit in place with a hammer to make it fit in the buffer tube.

---

Cancel Comment

I will buy again

Amazing product, light weight and great quality

---

Cancel Comment

Fsi brace

Amazing exactly what I wanted and fast delivery

---

Cancel Comment

Seems good

seems well built, and very light

---

Cancel Comment

Perfect

The brace is light and perfect for what she was looking for. Showing off her Robins egg blue buffer tube.

---

Cancel Comment

Good brace

Good brace solid built! And great price! Works well on my ar-9 build!

---

Cancel Comment